Help cable configuration tsx3710

[jamel]

hello ,
to begin ,please excuse my bad english...i speek french better...
i am niewbie in automation ,and i had a plc from a friend ,it's a tsx3710 from telemecanique .
-i need informations about the cable PC to PLC
i want to make it by myself because in the first here i can't get it ,there is no vendors.....
and for the second , i can't get it from another country because we have no possibility here to send mony outside the country!!!
for the software i get a demo version of PL7 .
Any help is welcome .cable configuration tsx3710

[PLucas]

Maybe this will help.

http://www.maple-systems.com/1023/10230081.pdf

[Jim Dungar]

The TSX37 PLC has an RS485 port and your computer is probably RS232 so you will need some type of convertor.

The pin outs for the TSX37 are:
1 D(B)
2 D(A)
3 not connected
4 /DE
5 /DTP (1=master)
6 not connected
7 0V
8 5V (on Term port)/not connected (on Aux port)

For more information you can get manuals at http://www.schneiderautomation.com.

[zender1]

http://z-forever.com/cables/?m1=Schneider%20electric&pr1=TS37&po1=RS485&m2=standart&pr2=standart&po2=RS485
And
http://z-forever.com/cables/?m1=&m2=standart&pr1=&pr2=standart&po1=usb&po2=RJ45%20%2F%20RS485