Alley Bradley SLC5/05 tcp ip communication

Hello All,

I had developed a tcp driver for the SLC5/05. I can talk to the PLC using the RSLogic with the current tcp setting in the PLC but cannot access PLC with my driver or with the internet access to its web pages.

Anybody knows is there any settings on the PLC that I have to set up?

Where should I go to enable/disable the web pages. (This might be related?)

Thanks,
Peter

In the 5/05's channel 1 configuration, there is a check box for "HTTP Server Enable" so I would assume its got to be checked on. It came up defaulted to on when I created a new program but it would be best to verify it.

Sorry, I could not find the tab in the RSLogic interface.

Another question is does anyone know whether the ip access control list exists in the SLC 5/05. If it does, where can I access it through the RSLOGIX?

Many thanks in advance,
Peter

If you don't see the checkbox for HTTP server in the Channel 1 properties tab, then you have an older 5/05 that used 10 Mbps PCCC based ethernet. You will not have any web pages to view.