Communication between FX2NC and Q series over GSM modem

tztrh

Member
T
Join Date
Sep 2005
Location
fhf
Posts
2
I need to make this to work. I have Fx2NC with Fx2NC-232ADP com. module and GSM modem. I have to make a program that will menage communication between Q series PLC and FX2NC.
Does anyone have any expirience with this? Any sample code?
 

Similar Topics

P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
62
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
93
mk42
M
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
103
yawin
Y
P
Is put/get necessary for communication between 2 PLCs?
Or there is an alternative to this? I suppose there are many but I've only seen put/get Can you for example set up a new plc and connect it to an...
Replies
5
Views
302
JesperMP
JesperMP
A
Loss of communication between PLC and SEW frequency converter
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
Replies
0
Views
101
AdamV
A
Back
Top Bottom