[font=新]1.[/font]On [font=新]bit [/font]system[font=新] ” SY3[/font][font=新](use 0 = time base 10ms)and SY19(use 0 = active fast task) ”,where can I use to main action? Can give some example for me?[/font]
[font=新]2.[/font]On [font=新]bit [/font]system[font=新] ”SY6[/font][font=新](use 1 = time base 1s)”,this is [/font][font=新]interval between[/font][font=新] [/font][font=新]On/Off pulse 1sec timepiece or [/font][font=新]explain [/font][font=新]Drum[/font][font=新](relational )and [/font][font=新]Grafcet[/font][font=新](SFC)[/font][font=新]time base for 1sec[/font][font=新],because the system want to use contact the name is SY6’s NO/NC.[/font]
[font=新]3.Drum controller[/font][font=新](relational)system(print original system)D0,V,the system have to use contrast with D0,V >=100,it is not clear function about D0 TB=100ms, that true is [/font][font=新]100ms or 1s[/font][font=新](SY6 on)[/font]
[font=新]4. On Grafcet[/font][font=新](SFC)system Step Active (X11), if it send to - [/font][font=新]pulse signal[/font][font=新],and on LABEL system have output conditions with AND B0 SET B1,do it express two output [/font][font=新]Active?[/font][font=新][/font]
[font=新] LABEL[/font][font=新]:X11[/font]
[font=新] B0 B1[/font]
[font=新] ---| |--------------[/font][font=新](S)[/font]
[font=新] [/font]
[font=新] LABEL[/font][font=新]:label: 222[/font]
[font=新] X11 O4,F[/font]
[font=新] ---| |--------------[/font][font=新]()[/font]
[font=新][/font]
[font=新] [/font]
[font=新]Please help me accordance with appendix to fill up the address on system.[/font]
[font=新]Thanks[/font]
[font=新]2.[/font]On [font=新]bit [/font]system[font=新] ”SY6[/font][font=新](use 1 = time base 1s)”,this is [/font][font=新]interval between[/font][font=新] [/font][font=新]On/Off pulse 1sec timepiece or [/font][font=新]explain [/font][font=新]Drum[/font][font=新](relational )and [/font][font=新]Grafcet[/font][font=新](SFC)[/font][font=新]time base for 1sec[/font][font=新],because the system want to use contact the name is SY6’s NO/NC.[/font]
[font=新]3.Drum controller[/font][font=新](relational)system(print original system)D0,V,the system have to use contrast with D0,V >=100,it is not clear function about D0 TB=100ms, that true is [/font][font=新]100ms or 1s[/font][font=新](SY6 on)[/font]
[font=新]4. On Grafcet[/font][font=新](SFC)system Step Active (X11), if it send to - [/font][font=新]pulse signal[/font][font=新],and on LABEL system have output conditions with AND B0 SET B1,do it express two output [/font][font=新]Active?[/font][font=新][/font]
[font=新] LABEL[/font][font=新]:X11[/font]
[font=新] B0 B1[/font]
[font=新] ---| |--------------[/font][font=新](S)[/font]
[font=新] [/font]
[font=新] LABEL[/font][font=新]:label: 222[/font]
[font=新] X11 O4,F[/font]
[font=新] ---| |--------------[/font][font=新]()[/font]
[font=新][/font]
[font=新] [/font]
[font=新]Please help me accordance with appendix to fill up the address on system.[/font]
[font=新]Thanks[/font]