plc

on a GE fanuc plc logicmaster, ladder logic
what is "c 600 cnt" is, also "k 0005"

on a GE fanuc plc logicmaster, ladder logic
what is "c 600 cnt" is, also "k 0005"

Sounds like a Logicmaster One program for the Series One, aka the TI305, aka the Simatic TI305, aka the Automation Direct DL305.

C600 is an address for a counter.
K0005 is a constant (value = 5).

on a GE fanuc logicmaster ladder logic
what is a simple explanation of this logic


K 0000
..........+[D STRO FUN 50]
.
. STEP
. TIME
. PRESET
.
.R 414
+[D OUTO FUN 60

K 0000
[D STRO FUN 50]

Loads the 16-bit accumulator with the value of the constant (0).

R 414
[D OUTO FUN 60

Transfers the contents of the 16-bit accumulator to the specified memory location (R414)

Memory locations in the 400 - 577 range are used for shift register operations.

STEP
TIME
PRESET

is a reference description attached to the memory location R414.

The logic moves a value of zero into the memory location R414.