about programming panelview

teomatini

Member
T
Join Date
Aug 2005
Location
mexico
Posts
1
hi, I want to program panelvew 550 DH+, but I don't have DH+ port on my PC. buy I have one SLC 5/04, can I program the panelvew using the 5/04 DH+ port., and I conect to my 5/04 by rs232???

tanks
 

Similar Topics

K
PanelView 300 2711-K3A10L1 Programming cable
Hey Guys I am trying to figure out the correct cable to use to connect from my laptop to this Panelview using panelbuilder32. I was sure I had...
Replies
5
Views
2,040
kennadrin
K
L
manual for programming Panelview 800 with CCW
I am new to programming the Panelview 800 HMI screens. I have built some basic screens and it is mostly self explanatory. I would like to add a...
Replies
1
Views
8,980
AustralIan
A
S
Reprogramming AB PanelView 600
Hey guys, I have an AB PV 600, 2711-B6C1 (RIO) Series B, Rev B, Frn 3.15 which unfortunately fails the CRC firmware check. I have multiple...
Replies
2
Views
1,815
soul40k
S
G
Panelview Pluss 1000 programming question
I'm currently updating one of the Panelview programs at my plant, and I am hoping someone can answer a question for me. In this program I have 4...
Replies
4
Views
3,167
gmarowski
G
Y
Communication cable(Programming and Runtime) For Panelview 300
Hi All, Currently There is Panelview 300 Communicating with 1794 Flex Processor L34 on RS 232 Port (DH 485). The Flex Processor will be...
Replies
4
Views
2,622
YASH_A
Y
Back
Top Bottom