how can we do that

mehkocak

Member
Join Date
Jan 2005
Posts
58
for example if we have a s5-95u 2dp plc and a coros op15 connected to s5-95u via pg connection and the s5-95u is connected to master s5-135u plc via dp connection.Now how can you do that hardware connection and how can you point the addresses of input and outputs.I mean if we do harware configuration of s5-135 via comprofibus then how it is possible to indicate the op15 in harware conf.If you have any opinion please tell me in details.

And also how can I connect to the s5-95u plc from master s5-135 because it is not possible to see the program running from s5-195(an op15 is connected to pg connection of s5-95u).
 
Last edited:
Back
Top Bottom