Need advice

Foty

Member
F
Join Date
Oct 2002
Posts
30
I'm in the process of designing a system for the EU market,
I was wondering if anybody had any information, or experience on how to get CE approved and if I need to consider other things.

Presently we are CSA approved.

Thank you
 
Hi

You don't need to get CE approved as such...

Google for the terms:

"CE mark"
"self-certification"
"technical file"

in a single search
 

I have been reading up on the subject, I notice that I might be already approved, because I'm CSA approved.

Since it's my first time sending machinery in the EU, I wanted some advice on what would be the best approach, what should I consider. For example the voltage and the Hz are different from North American standards.



Any information on this subject would much appreciated.


 

Similar Topics

P
Need Advice on Wiring PLC System with Two Different PSUs
I'm currently working on a PLC setup and could use some advice on the best way to manage my power supply units (PSUs). Here's the configuration...
Replies
3
Views
403
JeremyAdair87
J
M
New to servo programming need advice
So, I'm about to start my first ever project that include a servo motor Here some of the component i bought for the project so far: - PLC: Omron...
Replies
0
Views
381
Martindag
M
R
CMZ CTN330 need advice
Dear connoisseurs of antiquity and non-standard solutions, welcome) I don’t really hope, but suddenly someone had a deal and, most importantly...
Replies
0
Views
569
Ruhstko
R
M
Solid Level Density Measurement sensor, need advice
Hey guys, We have a metal container at work, we fill with saw dust (20fts x 15fts x 10fts) with the top open but we normally put a container...
Replies
4
Views
1,543
dwrightrobogistics
D
M
Isolator for linear encoder 0-10v need advice
heya guys, For my project, i'm currently looking to add this type of linear encoder. The control company i'm working with told me they had bad...
Replies
6
Views
1,205
Martindag
M
Back
Top Bottom