TI164 printing a hardcopy

sparky64

Member
S
Join Date
May 2003
Location
Newcastle upon Tyne
Posts
127
I've got a TI164 plc and have connected to it with a TI103 programming device, I'm trying to print from the serial port to a printer that has a serial port, can anyone tell me the pinouts for the cable 25 pin to 25 pin, both male connectors.

Thanks for any help

Sparky
 

Similar Topics

C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
6
Views
55
croven_plater
C
D
Printing from a Micro800 PLC
My company built a small test machine using a Micro800 PLC and CCW software. We chose the Micro800 because the machine is very simple. We are...
Replies
2
Views
135
drbitboy
drbitboy
R
RSLogix Report Printing Issue
I had a student fooling around with settings tonight, and now when I try to print a program ladder, each rung prints on a separate sheet. Too many...
Replies
9
Views
347
Operaghost
Operaghost
P
Printing over ethernet with Guardlogix 5380?
Looking to Print over ethernet with a 5069-L320ERMS3 Compact GuardLogix 5380 Safety Controller. Printer model yet to be provided. But a few...
Replies
5
Views
1,572
DaDaDadeo
DaDaDadeo
D
Printing from a PanelView Plus 7 Performance Series A using a Raspberry Pi?
I have a customer who has 20 of our systems using PanelView Plus 7 Performance Series A terminals. With how hard it is to find printer nowadays...
Replies
4
Views
1,586
Dustball
D
Back
Top Bottom