Jim Morgan
Member
Can I load 6200 on a windows 2000 machine?
6200 software
- Thread starter Jim Morgan
- Start date
Yes you can.
But you cannot use the internal drivers or Interchange to connect to the PLC.
(maybe DF1 will work, but DH+ will definitely not work).
In late versions of 6200 there is an "RSLinx" option for the online connection.
When you chose that one, and select online, the software will automatically switch to RSLinx where you must point out the PLC to connect to, after this the software automatically switches back and you are online.
The online performance is useable but not fantastic.
If you want to work a lot with 6200, then a dual boot with Win 95 or Win 98 is the best option.
But you cannot use the internal drivers or Interchange to connect to the PLC.
(maybe DF1 will work, but DH+ will definitely not work).
In late versions of 6200 there is an "RSLinx" option for the online connection.
When you chose that one, and select online, the software will automatically switch to RSLinx where you must point out the PLC to connect to, after this the software automatically switches back and you are online.
The online performance is useable but not fantastic.
If you want to work a lot with 6200, then a dual boot with Win 95 or Win 98 is the best option.
Similar Topics
Dear all
How to open .b0$,b1$,b2$,da1,ix$,lx$ allen bradley plc2 files.
Please help
Thanks & Regards
Afeef
Does anyone know where i can get a copy of AB 6200 software that i can run with dosBox?
Hi everyone...
Does anyone have a copy of the old AB6200 PLC2 software that I could get a copy of.???
We have some old PLC2's that we are...
I am working on a 5/250 system with 3 scanners. 1 is faulted and causes problems with the DH+ comms. The system works when I remove the faulted...
Hi,
I'm having trouble restoring my back-up data to a PLC 5/60. I'm trying to see if the problem is with the PLC or the 6200 software. It either...