kf2 to dh485

hi,
do anyone know the pin connection for the kf2 d-shell 15 way highway plug to the 6 way phoenix connector on a 1747-aic .
had a look on ab site but no success .Also have anybody connected a beijers e300 hmi to a dh485 network as i am experiencing problems.

cheers terry

Its all right here

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1761-um004_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1770-um521_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/rn/1770-rn132_-en-p.pdf

P.S. All this stuff can be found here

http://literature.rockwellautomation.com/idc/groups/public/documents/webassets/browse_category.hcst

From Gerry's post at mrplc
Quote
"A 1770-KF2 is for RS232 to DH+ interface.

For RS232 to DH485 interface, you would use a 1770-KF3"

or just an AIC to convert