I am looking for a PLC programmer in the eastern CT area and was hoping there was some site to find PLC programming contractors. Any assistance appreciated. ken 303-818-2971 [email protected]
Help Locating Programmer
- Thread starter kmajor
- Start date
elevmike
Member
Ken,
You might post a short project description, and the PLC equipment to be used. Not all PLC projects are the same.
Even though they're both Doctors, there's a big difference between a hand surgeon and a brain surgeon. One being the cost.
You might post a short project description, and the PLC equipment to be used. Not all PLC projects are the same.
Even though they're both Doctors, there's a big difference between a hand surgeon and a brain surgeon. One being the cost.
Similar Topics
Hello guys,
So right now we are having some issues with a scanner. We are using Datalogix 8330 connected via RS232 and 2 of the wires are...
Hi,
My former company has 'downsized', and I've started my own business.
I've been fortunate to have a number of friends who are helping out...
Hi Everyone,
i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Hello,
I am trying to replicate a piece of logic on the PLC5 onto an SEL RTAC. I am using ladder on SEL and FBD. I am having issue on the ladder...
