Micrologix 1200 and 1500

There are only one HSC and one PTO in ML1200, versus two of each in ML1500. ML1200 has no internall real-time clock (extra module only).
Their extension modules are not compatible.
The 1500 CPU is a separate piece of hardware that slides into the main unit. It may be with one or two communication ports.
The 1500 main unit may be of different types of I/O.
The 1200 is single unit, one or two ports.
1200 and 1500 main units choise is different by size and I/O type.
These are, generally speaking, all the major differences.
 
Tom Jenkins said:
I assume that is Autralian. What is that in US and Canadian?

That would be a correct assumption -

On the top half of the planet the difference is -300. Now if the question had been phrased the other way around, what is the difference between 1500 and 1200, then the answer would have been 300 for the top half of the planet, and -300 for Alan and our friends downunder.

🍺
 

Similar Topics

Please I have micrologix 1500&1200 The first time I make configuration for 1200 it was ok and i see the plc but there was on it a old programme so...
Replies
2
Views
1,575
We had a DH-485 network with a SLC 5/02, PV 550, 2 Micrologix 1200, and Mircologix 1500. I need to know how to change the nodes of the 2 1200s...
Replies
4
Views
2,829
Hey everyone, I've got what I think is just a quick question here. I'm sending some data from one micrologix to another, there are already some...
Replies
0
Views
4,855
HI EVERYONE please read if I understood correctly : I have a rung consist of one input and one output(OSR instruction), when input on and then...
Replies
5
Views
6,471
Hi everyone, I'm working on a project where I need to exchange data between a Siemens S7-1200 PLC and an Allen-Bradley MicroLogix 1400 PLC. The...
Replies
8
Views
603
Back
Top Bottom