S5 power supply

Hello,

I have a old S5 power supply. If i connect this power supply without any modules or cpu it give me the good voltage and all front panel leds are green (all are OK). If i try to connect inside of a complete systems the red leds will light up and automaticaly cpu goes to stop mode.
Please give an advice about this problems.
Many thanks.

bogdan, december 15, 2005

ask to siemens!

S

Hi i once used to have the same problem and i replaced the power supply with a new one or you can try to open it and take a look inside...

Hello bogdan , i am from constanta , have you measured the voltages while the ps is in a complete system?

Salut Catalin,

Cred ca putem discuta si in limba romana. Nu imi mai aduc bine aminte daca am masurat atunci cand era conectata in sistem, sunt circa 2 ani de atunci, tot ce-mi amintesc este ca se aprindeau toate ledurile rosii si cpu trecea in stop.
oricum daca ai ceva sfaturi sunt binevenite.
tinem legatura.
merci.
bogdan

bogdan_cioric said:

Salut Catalin,

Cred ca putem discuta si in limba romana. Nu imi mai aduc bine aminte daca am masurat atunci cand era conectata in sistem, sunt circa 2 ani de atunci, tot ce-mi amintesc este ca se aprindeau toate ledurile rosii si cpu trecea in stop.
oricum daca ai ceva sfaturi sunt binevenite.
tinem legatura.
merci.
bogdan

Click to expand...

Unde erau situate ledurile astea rosii?