Magelis and Siemens Step 7 Integration

Anie

Member
A
Join Date
Oct 2005
Location
Jakarta
Posts
11
Hi All,
I wonder if I can integrate my existing S7 programs using Siemens PLC by adding a new Touch Panel provided by Schneider (Magelis XBT , one which support Profibus). If It is possible do I need a GSD files to be read in the HW conf or it will be just plug and play, I mean connect the Touch Panel thru Profibus and set the address only ?

Thank You :geek:

Anie
 

Similar Topics

P
PLC Siemens S7-200 With Magelis
Hi I need to connect a magelis xbtgt2330 telemecanique with a PLC s7-200 siemens what do i need? thanks....
Replies
1
Views
3,180
rigicon
R
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
108
BODUSEYTU
B
1
Magelis HMI not working as intended
Good morning friends. . We are having a problem with one of our machines that have two HMI consoles connected to the same network. They have...
Replies
0
Views
1,110
16000lc
1
EICS
Modicon M238 PLC & Magelis HMI - What software Needed ?
I am looking at a bakery oven that has been dismantled and in storage for unknown time, it was manufactured in 2012 so not that old. my gig is to...
Replies
8
Views
3,608
EICS
EICS
L
Schneider Magelis / Vijeo Designer
Any regular users of the magelis range? If so, anyone have a slick way to do a common popup with a rockwell UDT? My current approach is to just...
Replies
3
Views
1,646
Lare
L
Back
Top Bottom