1756-HSC RPM Calculation
- Thread starter JamesWSY
- Start date
Set up the module for Rate/Measurement mode with a sample time of 1 sec. The PresetValue Tag will contain the number of pulses in the 1 sec. sample period. Multiply this value by 60 to get the number of pulses per minute and divide this value by 1500 to get the RPM.
Download the 1756-HSC User Manual HERE for more information on how to configure the module.
Download the 1756-HSC User Manual HERE for more information on how to configure the module.
Similar Topics
I have am trying to determine if I can use a 1756-IB16I (or some dc input equivalent) to handle a 24vdc input pulse frequency of 80 pulses per...
Just finished an upgrade from a SLC500 to CLX where they had a 1746-HSCE and we're now using a 1756-HSC. Two wire pulse signal from the...
I have an older SLC500 that has a PLS card in its rack. I want to remove the SLC and add a L23E-QBFC1. Can a resolver be wired up to the High...
Our ABB Vision System requires a Pulse Train Input from an Encoder (12-15 VDC)to calculate the speed of the web. Instead of adding an encoder to...
I am upgrading HSC modules and have some questions. I can't attach the manuals for reference as they are too large.
1746-HSCE uses M0:e.1/4 for a...