Omron's Devicenet configurator and CX_integrator

Boyko

Member
Join Date
Oct 2005
Location
--
Posts
26
Hi.

Recently I started reading the Omron's Devicenet manuals and found the "Devicenet configurator" software higly recommended. I don't have it in my CX-One packet, but there is a CX-integrator. So, does the CX-integrator cover the Devicenet configurator functions?
If No, do I really need buying Devicenet integrator? Is it usefull?

_________
Regards
Boyko
 
yes, CX integrator can cover the device net configurator..
you must read the manual and check about your processor and device you used ?
 

Similar Topics

G'day All, Having some trouble with an omron devicenet network with nodes going into bus fault. CPU is a CS1G with a DRM21-V1 devicenet maser...
Replies
3
Views
1,801
Hello Everyone, I am trying to setup/debug a devicenet network, but can find where the variables have been setup. The Sysmac manual mentions...
Replies
1
Views
1,064
History: On an Omron CJ1W-DRM21 Network, had a servo driven actuator that went bust. This node is in the middle of the memory map (node 6), with...
Replies
2
Views
1,710
Hello forum members, We are having a frustrating issue (yet again with my favorite network - Devicenet). We have an ABB robot that works with an...
Replies
1
Views
3,980
Hi I am working repairing some old machines, 3 omron an 1 AB using devicenet, there is a CP1H with a CJ1W-DRM21 as master in node 63, two CPM1A...
Replies
1
Views
1,510
Back
Top Bottom