Pid Tuning For Flow Control Valves

naishadgosai

Member
N
Join Date
Aug 2005
Location
surat,gujarat
Posts
39
I Have A S7 300 Plc Of Siemens Make.i M Using Sfb 41 For Pid Tuning.

I Want To Tune My Pid For +/- 1 Degree Of Variation For One Of The Flow Control Valve.

I Want Any Random Figure Of P,i,& D Values Which Can Set My Pid For Nearest Range And Also Other Parameters Which Can Affect This Tuning.
Please Try Out This..........
 

Similar Topics

ELake20
Flow control valve PID tuning
Hi guys, Need some help. Goal: Closed loop flow control of valve positioner to a flow value. Parts: I've got a K series Rotork valve with...
Replies
8
Views
4,260
ndzied1
ndzied1
M
PID Tuning for Flow. Any suggestions please?
Hi there, This is my first time tuning a PID for flow. I have some experience with level and temperature. Anyway heres what I've experienced...
Replies
5
Views
6,505
Roy Matson
R
ryangriggs
Tuning PID loop - dealing with valve deadband and high sensitivity
Hello, I am attempting to tune a PID loop on a process. The process involves a valve with electronic actuator that has quite a high deadband...
Replies
10
Views
2,184
Lare
L
M
PID tuning woes
so i have 4 25gpm wells feeding a 1000gal tank (T-1), with an additional 15gpm from a decant tank for 3hrs every 12hrs. P1 and P2 both controlled...
9 10 11
Replies
154
Views
35,914
drbitboy
drbitboy
R
PID tuning on SLC 5/05
Hi everyone, yet another PID problem. I'm hoping I understand enough of the process I'm controlling that my request for help is reasonable. If a...
6 7 8
Replies
113
Views
28,057
MaxK
M
Back
Top Bottom