Eduardo
Guest
E
Where is the best place to get hold of one of these programming leads for Mitsubishi FX0s?
Can I get one from RS?
Can I get one from RS?
Goody
Member
RS or Farnells or any Mitsubishi dealer. BPX is a national Mitsi dealer; www.bpx.co.uk (about £90)
Similar Topics
Hi All,
Not done too much with Schnieder PLC's before and on the few I have there has always been a ethernet port, however have come across an...
I have a customer with several old Mitsi PLC’s all with the model number starting with F1. They currently don’t have any code backups as the...
Can anyone give me some advice on Boiler Lead/Lag and Air Compressor Lead/Lag PLC sequence. I need to developed the strategy to control this...
Hi as anybody got the pin out for a mitsubishi fx series PLC programming lead to allow me to connect through the HMI.
Hi,
I have lost the cable FX-20P-CABO which goes between the Mitsubishi FXO PLC and the FX-10P-E Hand Held Programmer. Each end of this lead has...