Ab-slc 500
- Thread starter jpd24
- Start date
504bloke
Lifetime Supporting Member
Excatly which slc is it you have ?
Ken Moore
Lifetime Supporting Member
Certain functions are only usable by certain processors. When you select the processor, the software automatically grays out the functions unavailable to that processor.
504bloke
Lifetime Supporting Member
Take a look at
http://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1747-rm001_-en-p.pdf
Appendix D lists instructions for the SLC Processors
http://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1747-rm001_-en-p.pdf
Appendix D lists instructions for the SLC Processors
Similar Topics
I have a program that I've used 100 times.
SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2.
Length & Position...
Everyone,
i am in the process of purchasing the Slc 500 version of software to support what we have and i have a question. Several of our...
In a slc 500 plc I am trying to move data with out using a lot of moves. I want to move data from n7:1 to n7:2 and data that was in n7:2 to n7:3...
Customer has a circa 2004 SLC-500 PLC. Fieldbus is a 1747-SDN DeviceNet scanner. Customer has SLC-500 file (.rss) with no comments. Has no *.dnt...
After I tried wiring, I used computer program communication to read the PLC N value, but received a NAK signal. And the DL3500 CHA light keeps...