PLC to Touch Screen Communications

I have been working with Directlogic PLC's for several years now. Up to this point, all my functions have dealt with physical inputs/outputs. I have recently been asked to work on a program using a Nais FPG-C32T2 PLC and a Nais GT30 touch screen. I have been trying for a couple days now to figure out the communication between the two and am quite frustrated and lost. If someone could give me a few pointers on basic communication and addressing for these units, it would be greatly appreciated. I have been able to create a layout for the touch screen. I have also played with the PLC some (physical I/O, timers, internal relays, etc.). Getting the two units to communicate and understanding the addressing is where the brick wall flies up. Thanks in advance to anyone who might help with my current issue. I'm sure there will be more to come.

Put Nais in your title (edit or repost). That way, the Nais guys will catch it.

Nais PLC to Touch Screen Communications

Thanks for the advice!!!

For all those of you that looked in on my question, I thank you for the attempt. I have managed to scratch my way through my needs. The ladder is practically done. Again THANKW EVERYONE!!!