Does anyone have example program for master slave communication with CP341 as master? The example in STEP7 is using only one function code, but how can I read different areas on modbus slave in one program cycle, and store them correctly.
Siemens Cp341 As Modbus Master
- Thread starter ktusak
- Start date
Similar Topics
Hi all,
Does anyone have any experience trying to simulate a Modbus master using a PC, The PLC is a cpu 300 with a CP341 RS485. I am...
Fellow PLC afficianados,
I'm having some difficulties reading registers from a Emerson Coriolis transmitter.
The following equipment is used...
Hi guys,
I have a Siemens CP341-RS422/485 module and I am trying to establish MODBUS communication to a series of Multilin269 / 469 protection...
Hi Friends,
In my one of the Project Using Siemens CP341 ( Communication Processor).
I am facing problem for modbus communication between CP341...
Hello good day to all
im using 3 siemens 3 plcs in profibus networks on master slave configuration its working fine.
From master profibus plc i...