PDA

View Full Version : Productionline Design


Eng1
March 13th, 2006, 02:50 AM
If you have any comments on the productionline development of a keyring, please let me know. We have to do a project on the assembly of a keyring. All features should be automated, except one. All programming of plc's, etc should also be done.

CaseyK
March 13th, 2006, 04:23 PM
Phil, please let me charge $120,000 for this answer. I will send you $20,000 in small unmarked bills via e-mail within a fortnight of payment.

Thanks.....ca$ey

504bloke
March 13th, 2006, 04:27 PM
Ill help for 10% ?

CaseyK
March 13th, 2006, 04:35 PM
Ill help for 10% ?

DEAL!

I don't have a clue where he is.

And I don't fly. So it may be difficult for me to drive to his location.

I figure I can add another 12-15 guys at 10% and still maintain a good profit margine, unless Phil gets greedy and wants 30%!

504bloke
March 13th, 2006, 04:44 PM
Yep, but dont forget that $120K is the quote, there may be unforseen extras !

CaseyK
March 13th, 2006, 06:21 PM
Gee, a cost over run???

Better check his credit line!!!

TWControls
March 13th, 2006, 06:41 PM
He should hire a consultant to determine if the $120,000 is a good price or not. Can I get in on this. I will do the consulting for $10,000.

For a 5% cut of the $120,000 I will guarantee approval

CaseyK
March 13th, 2006, 06:45 PM
He should hire a consultant to determine if the $120,000 is a good price or not. Can I get in on this. I will do the consulting for $10,000. For a 5% cut of the $120,000 I will guarantee approval

Great! You are in!

After viewing your avatar, I may have some work for you in Illinois.

Provided Illinois doesn't get blown into Indiana or Ohio!

TWControls
March 13th, 2006, 07:36 PM
Sounds great. Is it control work or do I get to do another study.:beerchug: