viscoelastic
Member
Is it possible to use Automation Direct HMI panels with SLC 500?
SLC 500 plus Automation Direct HMI
- Thread starter viscoelastic
- Start date
504bloke
Lifetime Supporting Member
Depends which HMI, but a quick look at there website un der
HMI > EZTouch > FAQ's > Does the HMI support AB Plcs
Answer
Yes, they support any Micrologix,SLC, or PLC5 series PLC serially,that supports either DH485/AIC or DF1 Protocol.
There are also models available with option cards to support AB Remote I/O or DH+, Devicenet,Ethernet/IP (Controllogix, Compactlogix).
HMI > EZTouch > FAQ's > Does the HMI support AB Plcs
Answer
Yes, they support any Micrologix,SLC, or PLC5 series PLC serially,that supports either DH485/AIC or DF1 Protocol.
There are also models available with option cards to support AB Remote I/O or DH+, Devicenet,Ethernet/IP (Controllogix, Compactlogix).
anks
Member
Yes, the C-MORE HMIs from Autonmation Direct are compatible with SLC500
Similar Topics
Hello,
I read a thread about someone wanting to close a window and latch a bit with the same button and the reply was that you need to use...
I have a program that I've used 100 times.
SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2.
Length & Position...
Everyone,
i am in the process of purchasing the Slc 500 version of software to support what we have and i have a question. Several of our...
In a slc 500 plc I am trying to move data with out using a lot of moves. I want to move data from n7:1 to n7:2 and data that was in n7:2 to n7:3...
Customer has a circa 2004 SLC-500 PLC. Fieldbus is a 1747-SDN DeviceNet scanner. Customer has SLC-500 file (.rss) with no comments. Has no *.dnt...