Sending the time each time B3/0 is "1" to Excel

mulderm

Member
M
Join Date
Jun 2003
Location
Netherlands
Posts
298
Hello,

I use a PLC/5 processor with RSLogix5 and RSLinx Classic.
Now I want when each time bit B3/0 is "1" place the time
with a resolution of 0,1 seconds to a cel in Excel using DDE.
Example: 18:45:7,8 (18 hours, 45 minutes and 7,8 seconds)
How can I make this?

mulderm
 

Similar Topics

C
Red Lion HMI - G320 - Sending Null command
Hi I need to send a null command down a comms port. But in the crimson software when i used /x00 it coming back "Cannot use null character is...
Replies
2
Views
405
chelton
C
E
Sending Emails from PLC
I've been having some trouble figuring out how to get the ip address for the mail relay server, is it something that I need to create separately...
Replies
10
Views
890
tlf30
tlf30
P
Sending Temp Sensor data From Kepware 6.0 Software to MicroLogix 1400
Hi Everyone, We have Silo System which has temperature sensor and these sensor data will be communicating through RTU unit to the Dedicated PC...
Replies
2
Views
600
parky
P
D
Sending Emails with 1756-EN2T/B
I've been trying to get this Ethernet module configured to send emails to our relay server but cannot get it to work. the EN2T is running...
Replies
7
Views
1,741
TheWaterboy
TheWaterboy
K
S7-1500 - Sending a HART Command programmatically using WRREC
I have a field device (flowmeter) using HART wired to a 200SP HART input card. I need to read flow totalization. Configuring the actual card to...
Replies
2
Views
614
danw
danw
Back
Top Bottom