Communication CP 1430 TCP with iFix

helveciolopes

Member
H
Join Date
May 2006
Location
São José dos Campos
Posts
1
I tried to estabilish communication between S5 and iFix 3.5. My hardware is CP-115U with a CP1430 TCP and my software is SI5 driver. But my CP works with TCP/IP and my SI5 driver works with MAC Address.
Someone can estabilsh this communication??
Thanks,
Helvécio
 

Similar Topics

K
communication processor CP 1430 TF stop red led on
Kindly, we have the following Siemens module with a stop red led on . What could be the problem ? How can we diagnose this module ? It is...
Replies
3
Views
2,256
sigmadelta
S
P
Communication WinCC <-> S5 CP1430
Has anyone experience in configuring a connection between WinCC and S5 with CP1430 card in S5. What are the step to setup communication?
Replies
0
Views
1,542
Plc_User
P
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
27
Sandeep Patel
S
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
87
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
112
mk42
M
Back
Top Bottom