mbbda Member M Join Date May 2006 Location Sheffield Posts 3 May 4, 2006 #1 Hi, can anyone help me with the logic for what could be describerd as a "cut throat timer", i.e starts timing after a trigger (is an output on for 20ms) but restarts everytime the output is triggerd. Thanks in advance, Brett.
Hi, can anyone help me with the logic for what could be describerd as a "cut throat timer", i.e starts timing after a trigger (is an output on for 20ms) but restarts everytime the output is triggerd. Thanks in advance, Brett.
mbbda Member OP M Join Date May 2006 Location Sheffield Posts 3 May 4, 2006 #2 I didn't mention the plc is a mitsibishi FX1s, so ther is no off-delay as with AB's
Ken Moore Lifetime Supporting Member Join Date May 2004 Location North, West, South Carolina Posts 3,473 May 4, 2006 #3 Tom Jenkins posted a "roll your own" off delay timer for the AD plc's here: http://www.plctalk.net/qanda/showpost.php?p=3427&postcount=5 Should be able to adapt this to your plc.
Tom Jenkins posted a "roll your own" off delay timer for the AD plc's here: http://www.plctalk.net/qanda/showpost.php?p=3427&postcount=5 Should be able to adapt this to your plc.
mbbda Member OP M Join Date May 2006 Location Sheffield Posts 3 May 4, 2006 #4 Thanks Thank you Ken, your roll your own timer has done the trick \\\Brett