Can i separate alarms?

briana banks

Member
B
Join Date
Jul 2005
Posts
242
Hi All

Using RSView Se.
can i separate alarms from diffrent groups of equipments
and manage the monitoring and acknowledgment my self.
this way i see alarms specific to each group.

Thanks
 
I dont think you can split them up. Or should I say I have never seen it done that way or tried it either. Thats a interesting question that I would like to know as well.
 

Similar Topics

P
Can a 1769-L36ERM communicate on 2 separate Ethernet networks
Hi Guys, I want to connect my 1769-L36ERM to a different network domain, is it possible to do it using only the dual ports in the Controller? Or...
Replies
3
Views
223
Jeev
Jeev
T
ab 1756-IF16 separate dc inputs
I have an existing 1756-IF16 wired as single ended with all RTNs tied together. Channels 0-3 have 2-wire loop powered devices connected with all...
Replies
3
Views
1,067
tlona
T
R
Firewalling a communication PLC between two separate process networks
I have a unique situation where we have two separate process networks ( plc, HMI, etc only). The two process networks are are owned by two...
Replies
6
Views
2,155
lfe
L
S
Combing 2 separate PLC outputs into a single connection
Hi there, Quick Question. I have 2 PLCs and 2 solenoids. I would like to wire these up so that If either one turns on, it will turn on both...
Replies
12
Views
4,947
VAN
V
AutomationTechBrian
Plastic Extruders: Separate Controllers for Heat & Pressure?
I'm trying to work through a question I have about using a PLC, plus separate temperature and pressure controllers on a plastic extruder rebuild...
Replies
9
Views
2,985
drforsythe
D
Back
Top Bottom