Wireless boton and light

IASSJRZ

Member
I
Join Date
Jan 2006
Location
Cd Juarez
Posts
12
Hi, I have a project, I need turn on-off two devices Lights, those are remotelly from my switches 3, is like triangle, soembody knows sometig to use there.

Regards.
 
How long is the distance?
I think u can use wireless button&light,but u must notice in some place wireless button is forbiden.
 
Actually The project has changed, now there are 6 switches which will turn on-off a remote light panel, there will be 10 stations with this 6 switches each one, max dist, will be 150 mts.
 

Similar Topics

C
Wireless Ethernet
Hello Y'all, I was wondering if there is any standalone solution to replace the ethernet cable to connect to a PLC? like perhaps a "Dongle"...
2
Replies
26
Views
2,333
JeremyM
JeremyM
T
IT question regarding wireless access to PLC device using a typical wireless router..
I know this can be done, but I can't get the router config right. My goal is to physically connect(using an ethernet cable) a device(PLC, RTU...
Replies
9
Views
1,019
I_Automation
I_Automation
C
Wireless IO Link
Hi All, I am working with an outside vendor on a project, and they have asked if they can use Wireless IO link for one of their remote IO blocks...
Replies
2
Views
1,130
tlf30
tlf30
C
Medium Range Wireless Comms with an AP
Hello everyone, I have read a few threads regarding setting up an AP to wirelessly communicate with PLC networks, but I have a unique question on...
Replies
1
Views
579
mk42
M
A
Wireless sensor
Hello, I am little new with PLCs. I would like to know how to connect a wireless sensor on PLC.
Replies
5
Views
1,582
Athanasios
A
Back
Top Bottom