S5 95U to OP5

AUTOLAC

Member
A
Join Date
Jun 2006
Location
Casablanca
Posts
1
I want to connect an OP5 to S5 95U, you can tell me how to program S5 to communicate with the OP5.
Somebody can send me an example of program which do that?
 
There's no need to program anything in the PLC to get data into the OP. The OP gets it's data directly from the PLC in the same way your computer does when you are monitoring a PLC program with it.

Kind regards,
 

Similar Topics

S
Siemens S5-95U plc battery and program
Hi there! This is something so old and having machine with it....... Last time unit was powered around 3yr ago and it did not work since than...
Replies
5
Views
229
geniusintraining
geniusintraining
A
S5 95U randomly STOP then RUN again
Hi All, We have a hydraulic press that is being controlled by Siemens S5-95U PLC . Lately the S5-95U has been randomly stopping during operation...
Replies
5
Views
2,418
James Mcquade
J
C
Simatic S5-95U -Stopped Error
Dear All,, We have a Siemens Simatic S5-95U and there is stopped red LED active Tried resetting the PLC,switching the Run/Stop toggle push button...
Replies
6
Views
3,041
Kataeb
K
M
S5-95U analog output
I m new in STEP 5 and i need help I have problem with the onboard's analog output 4-20mA, i want to forced it to see if it work or not but i...
Replies
8
Views
1,960
ivo.maenen
ivo.maenen
A
the plc Siemens simatic s5 95u
the steps to have a backup from the plc siemens Simatic s5 95u?
Replies
4
Views
2,364
geniusintraining
geniusintraining
Back
Top Bottom