I have a 1764-micrologix 1500 LRP series C, processor. On the channel 1 which is on the side I have a scanner connected. The panelview I have is a PV300 with DH485 protocol(2711-K3A2 PV300 Key, FRN 4.10-4.xx).
My question is, do you use the 1761-CBL-AS03 cable to connect to the AIC+, and if yes then how do you communicate with everything once channel 0 of the processor has been changed to DH485.
Or is there an easier way.
Thanks
My question is, do you use the 1761-CBL-AS03 cable to connect to the AIC+, and if yes then how do you communicate with everything once channel 0 of the processor has been changed to DH485.
Or is there an easier way.
Thanks
Last edited: