converter
- Thread starter Plc_User
- Start date
marius
Member
- Join Date
- Apr 2005
- Posts
- 239
manufactures sometimes offer additional solution for their parts, like this convertisseur de frequence, (sorry, not english)
http://www.controltechniques.cz/index.php?menu=289
but maybe you can just look for something more universal... many of those "termocouple linearizers" have ability to understand V and mA with output to mA or V as well....
like this one's input 10mV...50V and output 0..1V, 0..5V, 0..10V, 0..5mA, 0..20mA, 4-20mA ...
http://www.rawet.com/en/prev_dc/set.php?odkaz=prev_dc15
is it neccessary to have negative values? (-10V -20mA) ?
http://www.controltechniques.cz/index.php?menu=289
but maybe you can just look for something more universal... many of those "termocouple linearizers" have ability to understand V and mA with output to mA or V as well....
like this one's input 10mV...50V and output 0..1V, 0..5V, 0..10V, 0..5mA, 0..20mA, 4-20mA ...
http://www.rawet.com/en/prev_dc/set.php?odkaz=prev_dc15
is it neccessary to have negative values? (-10V -20mA) ?
Peter Nachtwey
Member
Werner
Member
HenryLamboo
Member
Similar Topics
I am looking for a fiber-to-copper media converter that is 120 VAC powered with terminals for placement in a small panel, so I can't use the wall...
Problem:
Our PLC can only output 4-20mA, but the actuators it needs to control, modulate based on a 0-135Ohm signal. Buying 4 or 8 individual...
I would like to install a non HART device in a system that uses HART, do you have a converter
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
Hi all,
I'm having a Red Lion DSPLE000 protocol converter on site to interface comms between an Allen Bradley L36ER CompactLogix, a S7-300 PLC...