Mohammed_saleem
Member
hi, my question is maximum how many inputs can be feeded to any plc?
inputs?
- Thread starter Mohammed_saleem
- Start date
rdrast
Lifetime Supporting Member
Well, that depends on the PLC. You need to review the manufacturers information for specifics.
ControlLogix can directly address 128,000 I/O points total, with up to 4,000 Analog points.
Micro PLC's can go from 12 to 64 I/O max.
ControlLogix can directly address 128,000 I/O points total, with up to 4,000 Analog points.
Micro PLC's can go from 12 to 64 I/O max.
Similar Topics
Compactlogix controller, program has 28 conveyors that use TON's to start the conveyors. The TT sounds a warning horn during start and the DN...
I am converting a SLC 500 to a Compact Logix. I plan on using a Compact Logix 5380 with conversion Kit.
The problem is that the analog input cards...
Hi there,
I'm doing some extensive testing and commissioning with a slew of new Emerson PACSystems RX3i PLCs. It would be convenient to...
Problem:
Our PLC can only output 4-20mA, but the actuators it needs to control, modulate based on a 0-135Ohm signal. Buying 4 or 8 individual...
Hello
I need to message read the entire 16 channel raw analog inputs from a 1769-L33ER Compact Logic controller to another 1769-L33ER Compact...