uticor operator panel

Amr Hassan

Member
A
Join Date
May 2005
Posts
340
i have a machine using step 5 plc and an op called uticor pci 185
i lost the program on the operator panel , but i have it on a file on the pc
i am trying to download it , but i do not have the procedure to download it.

Is there someone familiar with that op can send me the procedure
 

Similar Topics

A
Uticor PV700 communication with PLC 5/20 allen bradley
hello, we are using allen bradley plc 5/15 with uticor hmi pv700. but now we replace plc 5/15 with 5/20 but the uticor hmi is not communicating...
Replies
0
Views
919
affanqamar
A
Z
PLC 5/15 communication with Uticor hmi
I have Allen Bradley PLC 5/15 installed with AB Panel View 1400 using DH+ communication on machine. As PV 1400 is now obsolete so i m replacing it...
Replies
7
Views
3,235
RonJohn
RonJohn
L
UTICOR Message display to Controllogix
I have a UTICOR message display that was connected to a PLC 5/20E channel0 serial port, RS-422 (5 wires GND, SD+, SD-, RD+, RD-) I've upgraded...
Replies
4
Views
1,897
dmargineau
D
M
Red Lion Vs Uticor
Hey guys, I am faced with making a tough decision of choosing between a Red Lion G3 series HMI and a Uticor Tough Panel. I have heard great things...
Replies
6
Views
7,263
JeffKiper
JeffKiper
H
Uticor 6001 Director Loader Program
Hi All - I'm trying to connect to a 6001 Director (mid 90's era device) and we cannot find the "Progam Loader" software documented in the...
Replies
2
Views
2,512
Annon99
A
Back
Top Bottom