Hello everyone!
this is my first topic.
i have one touch screen panel (very old) B&R type: 5C2000.15
(486 with 8Mb eprom with 4 serial COM ports and 2 PCMCIA Slots and 1 FDD). The memory is formated and have only DOS 6.22.
I want to use this panel with PLC Siemens S7-200.
Can you help me with this:
1.) wath software i need to configurate the panel
2.) what cable i need to make a comunication between PLC and HMI Panel (i have for now only PC/PPI cable (RS232/RS485))
thanks in advance!
this is my first topic.
i have one touch screen panel (very old) B&R type: 5C2000.15
(486 with 8Mb eprom with 4 serial COM ports and 2 PCMCIA Slots and 1 FDD). The memory is formated and have only DOS 6.22.
I want to use this panel with PLC Siemens S7-200.
1.) wath software i need to configurate the panel
2.) what cable i need to make a comunication between PLC and HMI Panel (i have for now only PC/PPI cable (RS232/RS485))
thanks in advance!