Control1

I am working with a Modicon Momentum 171CCC96030 Processor, I need to know how to down load to it and assign IP address. Any help will be appreciated.
Thank you.

I know in Prowork Nxt there's a ethernet addressing section, but there is another better method using a schneider dos program. Its two years since I did this so can't even remember the name, but basically you run the program in dos and specify the MAC address and the IP address. The MAC address should be on a label on the unit.

Once the IP address is correct you can get on-line and download and any other on-line function.
EDIT:

A quick search and found BOOTP light.


might find other help here

http://modicon.control.com/sqposting_html?pid=1026218803