Problem with PPI-network with S7-200

mulderm

Member
M
Join Date
Jun 2003
Location
Netherlands
Posts
298
Hello,

I have a PPI-network with a laptop with Microwin software and a Siemens S7-222 plc and an operator
panel ESA VT150W.
Problem is when I will going online with the plc I get a message: MASTERS EXIST ON THE PROFIBUSNETWORK AND THE CURRENT DEVICES DOES NOT SUPPORT MASTERS.
TRY AGAIN AFTER SELECTING A MULTI-MASTER DEVICE.
So I can´t go online on the network.
When I will disconnected the operator panel then I can online with the plc.
But this is not the way.
Who can help me?

Greetings,

mulderm
 

Similar Topics

H
USB PPI multi master cable problem
Dear All, some how we lost the USB side of the cable of our PPI adapter and now we don't know the USB pin configuration inside the PCB part a 4...
Replies
8
Views
5,494
geniusintraining
geniusintraining
A
USB/PPI Multimaster Problem
Hello Guys, I'm trying to program S7 200 CPU 212 using USB/PPI mm ( 6ES7 901-3DB30 - 0XA0 ). Uploading the program from PLC is good but when I am...
Replies
2
Views
2,012
apolionman
A
A
Problem in selection of Siemens USB/PPI cable for S7-200
We have Siemens S7-200 PLCs in different machine. To get access to their program, I have arranged a USB/PPI Multi Master communication cable but...
Replies
5
Views
7,483
AB2005
A
N
PPI communication problem b/w PC & PLC
THE CONNECTION IS ESTABLISHING AND DISCONNECTING CONTINUOSLY AFTER THE COMMUNICATION B/W PC "Protool" & S7200 PLC "AT RUNTIME" THROUGH PPI CABLE...
Replies
0
Views
6,499
Nauman
N
R
TIA portal, problem upgrade project to newer version
Hi, I have had problem with upgrading some projects from v16 to v18. I tried it on 3 diffrent computers. I want to post this so that anyone that...
Replies
2
Views
43
JesperMP
JesperMP
Back
Top Bottom