Command PRV, MLPX.

tio_sense

Member
T
Join Date
Aug 2006
Location
Jakarta
Posts
3
Hi All,
I have problem with my job program.
Modify plc omron cqm1h.

How to understand PRV, and MLPX command? would you give a sample application?
 

Similar Topics

R
Danfoss Aquadrive FC202 - Local command only if no comm
Hey guys. As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the...
Replies
2
Views
43
Revnus
R
K
Kinetix configuration fault Command Notch Filter Width Undefined attribute
Kindly, we have the following configuration fault on a Kinetix 5700 axis. It only appears when we go online on the Plc. We are just starting the...
Replies
2
Views
87
Kataeb
K
S
DeviceNet - PF753 - Speed Command
Sigh, DeviceNet noob... I have a 1756-L55, with a DeviceNet module, and 10 PF700 all commanded with DeviceNet. One of the PF700's blew up...
Replies
3
Views
131
stretch_af
S
M
PowerFlex755 output frequency is different to the reference command
Hello guys, I am new to this forum and have some problems with my PowerFlex755 EENET frequency inverter. I want to do a point to point...
Replies
9
Views
384
Lynx777
Lynx777
T
Power Flex 525 did not run while the PLC command and VFD ready
I have an issue with Power Flex 525 during running processing, the VFD stopped suddenly while the PLC and VFD connection ok, VFD does not have any...
Replies
1
Views
123
jridge
J
Back
Top Bottom