AB SafetyLogix PLC - Losing Program

Redland Brick

Member
Join Date
Mar 2005
Posts
24
I would like to know if any of you have had a problem with going
online with a Allen Bradley SafetyLogix PLC. Sometimes when we
go online with this controller,out of the blue the CPU will fault
out , and we lose the program. I upgraded to the recent version of
RS Linx,it seems better ,but we still get bit by this problem from
time to time. I was in a hurry last time to get it up running,that
I forgot to get the fault code. Has you can imagine ,this causes a
lot of problems. I would appreiate your help. Thanks in advance.
 

Similar Topics

Hello, I have an automation direct d2 262 plc and C-more HMI EA9T6CL-R. I need to prepare a program, scheduled to be performed on a future date. I...
Replies
1
Views
43
Hello, I'm trying to delve a little into rs-485 communications for a couple projects of mine. Until now I've been using a delta vfd and a delta...
Replies
2
Views
53
Greetings All, I recently decided to start freelancing in Controls and Automation part time, most of my experience has been with Rockwell...
Replies
2
Views
102
I am having a problem communicating my PLC with Drive via Modbus connection. I start by opening the port and there is no problem, but then when I...
Replies
5
Views
72
I have worked on small projects using AB Micrologix but now we want to take a photo, process it online, and sort based on returned variables...
Replies
1
Views
99
Back
Top Bottom