Dick Morley, PLC inventor, to speak at OPC conference

danw

Lifetime Supporting Member
danw
Join Date
Oct 2004
Location
midwest, USA
Posts
3,427
Dick Morley, the guy credited with inventing the PLC, is listed as a conference speaker at the Matrikon OPC Users' Group meeting in Houston , Sept 13-14.

Those of you who read Monkeyheead's recent thread, linking to Morley's article on his involvement, might be interested.

Details of the conference are at or about
http://www.matrikonopc.com/opcug/index.aspx

Dan
 

Similar Topics

danw
RIP Dick Morley, Father of the PLC
Walt Boyes reports that Dick Morley, the Father of the PLC died on October 17th...
Replies
5
Views
2,268
(8{)} ( .)
(8{)} ( .)
L
Motor HP gain by reconnect? Dick DV attn
Dick this is all based on a separate post from Kid PLC. I have recopied relevant info to ensure I am not repeating partial truths - I hope. I...
2
Replies
15
Views
5,432
DickDV
D
L
Dick DV did homework THANKS
This is an offspring to another theread. I and several others thought that almost all AC electrical systems were required by NEC to be grounded...
Replies
3
Views
3,217
darrenj
D
P
AB PLC, Rslogix 5000, alarm issue
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
Replies
0
Views
10
PLCbug123
P
H
PLC NAT Suggestions.
I know this topic has been brought up a few times, but i had some specific questions. I have installed several 1783-NATR devices and they have...
Replies
0
Views
33
HoldenC
H
Back
Top Bottom