Installing S7
- Thread starter Deon
- Start date
Deon,
I had this same issue as we use the nc8000. You must delete the following key from your registry after installing each software package:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager
Here is the link to the Siemens FAQ describing this:
http://support.automation.siemens.com/WW/llisapi.dll?csquery0=reboot&aktprim=0&caller=nl&extranet=standard&func=cslib.csinfo&lang=en&nodeid0=10805386&objaction=csbrowse&objid=10805386&siteid=cseus&subtype=133000
Best regards,
Chris
I had this same issue as we use the nc8000. You must delete the following key from your registry after installing each software package:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager
Here is the link to the Siemens FAQ describing this:
http://support.automation.siemens.com/WW/llisapi.dll?csquery0=reboot&aktprim=0&caller=nl&extranet=standard&func=cslib.csinfo&lang=en&nodeid0=10805386&objaction=csbrowse&objid=10805386&siteid=cseus&subtype=133000
Best regards,
Chris
Similar Topics
A new point I/O rack is to be hooked up with the running PLC. In point I/O, it is supposed to be the OA4 card to be installed as per the...
During the process of installing Studio 5000 Mini Edition to my new machine at work, it seems as though some things like RSLinx Classic and the...
Hi All,
I haven't installed Unity Pro in years and needed to install it recently.
I initially tried installing Version 11.1 and the whole...
Hi all,
I tried to install Twidosuite on windows 10 but after installing i have the registration link which is not working and also i get with...
I completely uninstalled Wonderware 2020 and all the related components, rebooted, and then tried to install InTouch 2012, but it won't proceed...