Upload a file from SLC5/03

Hi guys, I need to upload (pull the program from the PLC to my laptop) from a SLC 5/03 but I dont have the original file.

Is this posible and if there is a quick guide please let me know.

Regards.

Delgado

This is the SLC 500 Hardware manual: http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1747-um011_-en-p.pdf

You will need a 1747-CP3 or null modem cable, RSLinx, and RSL500 software. Setup RSLinx with a DF1 driver.

You can upload from the SLC but note that there will not be documentation with the copy. Depending on situation the machine may require a password or be OEM locked.