DH485-Modbus Gateway

svn

Member
Join Date
Jul 2004
Posts
74
Has anybody used DH485 to Modbus Gateway from either Datalink or Prosoft successfully for communication between DCS (as Modbus Master) and SLC5/03 (as Modbus Slave)? Are there any communication reliability issues? Would the use of MVI46-MCM be a better solution?

Thanks

SVN
 

Similar Topics

Hello all, i have seen a few things here and there about connecting to a panelview 550, however i still would like to ask a few things, I have...
Replies
6
Views
110
Hi all, I had a setup with 2 Micrologix 1100 connected to a Panelview C300 over DH-485. I was mandated to upgrade the HMI, and proposed to...
Replies
5
Views
872
Hello, We have an older machine that has a standard PanelView (2711-T10C3) connected over DH485 to a SLC 5/04 PLC via a 1761-NET-AIC module in...
Replies
1
Views
658
Hi, I have a SLC5/03 connected to a working HMI via RE232 port, and connected to a broken HMI via DH485 (RJ45), I want to use the cable that used...
Replies
15
Views
3,235
Hey all, long time reader but first time poster here. I've been tasked with an odd one and was wondering if anyone else had experience in this...
Replies
17
Views
5,339
Back
Top Bottom