Kinetix 6000 Auxilary Encoder

BMLLER6758

Member
B
Join Date
Aug 2006
Location
Kiel
Posts
93
Hallo Folks !

I started a Project with CL5000 and Kinetix 6000. I want to install a Absolute Single Turn Encoder on the Aux Encoder Input of one Kinetix Module. When I ask Rockwell if this is OK, the told me yes ! BUT the guy on the Phone says that he remember there was trouble with noise if we use a MPL Motor with Absolute Encoder and an Absolute Encoder on the Aux Input. Did somebody know anything about it ????

Regards

Bernd
www.werner-kluge.com
 

Similar Topics

Level
Controller Upgrade with odd Kinetix 6000 MAM results
Howdy guys - Looking for some insight on the MAM instruction. Had an interesting one today: I performed a controller upgrade on an older system...
Replies
1
Views
436
robertmee
R
V
Kinetix 6000 to 5700
Hello everyone: I am looking at the possibility of migrating Kinetix 6000 to Kinetix 5700(460V 3 phase). Reviewing the drive catalog, I have the...
Replies
4
Views
1,128
VulcPAC
V
C
Kinetix 6000 Homing Loss
We have two similar pieces of equipment, one of them uses a Kinetix 6000 for an axis and the other uses a Kinetix 350. When power is removed...
Replies
1
Views
841
alan_505
A
Christoph
AB CompactLogix L43/ Kinetix 6000 servo
Hello All I have a machine built in 2013 but never commissioned. I have it almost complete. It has 2 Kinetix 6000's with a CompactLogix L43 with...
Replies
6
Views
1,197
Christoph
Christoph
Christoph
CompactLogixL43 with Kinetix 6000 on Sercos
Trying to configure the 2nd drive on this machine. It is being difficult. I have the gains speed encoder data all with good data. when I try to...
Replies
8
Views
1,835
DarrylR
D
Back
Top Bottom