richb
Member
what do I need to communicate with a direct logic 305 plc from a lap top?
Last edited:
direct logic 305
- Thread starter richb
- Start date
Clay B.
Lifetime Supporting Member
Everything you need is right here.
http://web5.automationdirect.com/adc/Shopping/Catalog/PLC_Hardware/DirectLogic_305/Programming_SW_-a-_Cables
http://web5.automationdirect.com/adc/Shopping/Catalog/PLC_Hardware/DirectLogic_305/Programming_SW_-a-_Cables
icky812
Lifetime Supporting Member
If it is a D3-330, or TI325, or Siemens 330, you will also need a D3-232-DCU.
Similar Topics
I have a Direct Logic 305 D3-10B card rack and all i see online is a D3-10-b-1 will i be able to interchange with the D3-10B or where can i find...
I have a loaded Model 305 sitting... I'm 100% new to PLCs.
It has two RS-232 ports... can I program it through these ports or do I need a special...
I am new to the plc group (got thrown in actually) i've got the low level ladder logic figured out(sorta) i can make the pumps turn on and off but...
Greetings to all,
I have a situation with a DL305, Bridge CPU F3 PMUX-1. There are to LED on the cpu, one reset and one addr. It is connected...
So this is my attempt at collecting and displaying data on a Cmore panel With a DL06. Each pair in my logic is the "Time total" or the TA15 and...
