Socket Communication with S7 CP 443-1

namboothiripad.mbs

Member
N
Join Date
Apr 2006
Location
Rourkela
Posts
18
Hello,
I have a S7-414 system with CP-443-1. I am able to communicate with WinCC through Siemens Ethernet card and also through normal ethernet card which comes with PCs.
I want to communicate with th PLC using socket programming so that,
I can get the data directly, without WinCC.

When coming to archiving, WinCC stores the data at 400-500 millisecs.
I want to selectively get the data at a faster rate.

The PLC cycle time is only 8 ms.

Where can I get the details of this ?

Regards.
 

Similar Topics

F
TCP Socket Communication with A-B's between Logix Controllers
Silly question: I would like to know if anyone has done TCP Socket communication between Logix controllers? I do know it works fine from any...
Replies
6
Views
4,378
Tao
T
M
Socket Communication in PFC100 750-8101
Hi Everyone, As I started working on ecockpit with PFC100 750-8101 controller. I need to develop an TCP_Server apllication using socket...
Replies
3
Views
1,970
drbitboy
drbitboy
H
AB Micro850 Socket TCP communication
Hi all I'm new to Allen Brabley Plc's, but hope that some of you are able to help on this issue. Hardware: Allen Bradley Micro850 cpu Software...
Replies
0
Views
2,234
HM-Systems
H
T
UDP socket communication to PC with ControlLogix and 1756-EN2T
Hello, I need to establish a UDP socket communication between a ControlLogix L72 PLC and a Linux-PC on the other side with a 1756-EN2T network...
Replies
9
Views
6,612
BachPhi
BachPhi
H
Built-In Ethernet UDP socket communication Mitsubishi Q03UDECPU
Hi All, I am new in PLC programming. My project is to send the data from PLC (Mitsubishi Q03UDECPU) to PC using Built-in Ethernet port. After...
Replies
0
Views
1,928
hntuan94
H
Back
Top Bottom