question about linking remove locations

rflack

Member
R
Join Date
Oct 2006
Location
Mississippi
Posts
1
I have a new project in which I have 4 AB micrologic 1500's in a remote factory that I need to access remotely and monitor operations in real time. I would prefer a software in which that I could design a monitoring screen on my remote PLC to look at the operations. HIgh speed internet is availble and I have purchased ethernet cards for each PLC system. Anyone have any recomendations?
 
I have done the same thing numerous times. I have wired all the plc's back to a pc with a PKTX card in it. I can then access the network with a VPN connection, and then the pc with VNC which is remote control software which is a free download from realvnc.com


Derek
 

Similar Topics

S
simple logic question
Hello again..trying something on an existing poorly written program and just wanted to double check something system is an A-B MicroLogix 1200 In...
Replies
5
Views
143
robertmee
R
F
FactoryTalk HMI Question (Recipes)
Good morning! Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
Replies
0
Views
55
Foxtrot2050
F
J
CL 5380 RTC vs Timer.ACC, question
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
Replies
2
Views
83
JZerb
J
P
Hello! I have a question about HMI 2711R
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
80
plc_siamens
P
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
71
jimix
J
Back
Top Bottom