S7200

gica2002

Member
G
Join Date
Mar 2003
Posts
6
Hi there,

Could anyone tell me what cable do I need for connecting my PC to a small Siemens S7200 (CPU214)? I mean, any wire details, interface?
I know it isn't MPI, nor RS232, but the Siemens cable costs 85 Euros.

Thank you,

gica
 
Thank you RRobins, but I think that's a Siemens catalog code.
Well, I was thinking to biuld myself the interface! :))

Adrian
 
Gica2002,

I wish you good luck and if you succeed then I'm very interested to know how you did it. The converter Siemens sells is not only a RS232-RS485 converter which is data-controlled, it also contains some protocol conversion. To re-engineer this it could cost you very well a lot more than 85 Euros.

Kind regards,

Jean Pierre Vandecandelaere
 

Similar Topics

A
AKD BS7200 software
Hi there! I know this is playing in archeologist, but I need to tune a bit some older Kollmorgen/AKD Digifas 7100 servo drive. Any chance of...
Replies
3
Views
1,137
autobus
A
A
Plc siemens s7200
hey guys here first time for me in this awesome forum actually i have S7-200 connected to Winview HMI and HMI project file has lost and broken...
Replies
0
Views
600
Affrian
A
C
TD200 and S7200
If a TD200 program was created with the wizard in Microwin does anyone know if the code for the TD200 would be uploaded to micowin when doing a...
Replies
0
Views
1,176
cottagewood
C
B
S7200
Hi, I have a S7200 PLC with PC based WinCC Scada. This PC was replaced due HD failure and replace with a back-up PC provided by the contractor...
Replies
2
Views
1,625
Borgj
B
S
S7200 comms to Citect
Hi guys, I have a client with a siemens S7200 PLC (1215C CPU),which has an on board ethernet port (marked "profinet" on the PLC) and I need to...
Replies
1
Views
1,534
sigmadelta
S
Back
Top Bottom