S7 RS232C module for sending serial string at 10400 Baud

najafabadi

Member
N
Join Date
Aug 2006
Location
Tehran
Posts
15
Hi everybody,

Is there any module available for Simatic-S7 that I can use it for sending serial data (RS232C) in a nonstandard baud rate? I need to send an string from PLC in 10400 baud. I saw the CP 341 manual before it suppoerts only the standard baud rates.
Many thanks before for your help.

B.Najafabadipour
 

Similar Topics

C
Mitsubishi Q00UJCPU communicate with HMI through RS232C
Hi, is that anyone know the pin layout for the communication cable from Mitsubishi Q00UJCPU (6 pin mini) to any Schneider HMIGXU (D sub 9)...
Replies
0
Views
1,116
CKLiang
C
J
Hex equivalent Ascii protocol for CP340RS232c
Dear All Can anyone help to communicate ascii rs232 to s7 300 PLC through Cp340Rs232. RS232 9600 baud, 8 data bits, 1 stop bit, no parity, no...
Replies
1
Views
1,357
gclshortt
gclshortt
L
Siemens SI ASCII Card (RS232C) with a barcode scanner
Hi All, I have application to read data from barcode scanner to S7 PLC through SI ASCII Card (RS232C). I have tried using the standard FB's to...
Replies
4
Views
2,590
luyolo21
L
J
RS232C to storage device
What I'm trying to do is send data from a Micrologix 1200R via RS232C to some kind of storage device. The storage device will need to allow me to...
Replies
9
Views
3,928
JeremyH
JeremyH
C
RFideas PCprox rs232c reader
For those of you using Rfideas PCprox readers...how are you getting that data to reach your plc? I can hook it up in hyperterminal and and it...
Replies
0
Views
1,952
cire3621
C
Back
Top Bottom