SLC 5/02 and EPROM

machiv44

Member
M
Join Date
Dec 2005
Location
California
Posts
2
My company ordered a copy of a PLC program with the rung comments included. We received an EPROM (1747-M2) chip with the original program on it. Is it possible that the rung comments are included on the EPROM chip?

Thanks,
Don
 

Similar Topics

S
Slc 500 eeprom
Hello I have a couple of processors a 5/01 and a 5/02 both with eeproms When i try to load program onto either eeprom with either processor a...
Replies
4
Views
4,799
Stevecur123
S
S
SLC and RSLogix 500 "write to EEPROM failed"
Hi all, yesterday I was at a customer site doing a PM and after making a couple of minor mods to the program, I went to back it up to EEPROM (yes...
Replies
2
Views
2,377
Ken Roach
Ken Roach
B
SLC-500 EEPROM Question
I recently had a 5/04 lose its program for what I'm atributting to a cheap battery that was installed 6 months ago so installed a EEPROM. I...
Replies
2
Views
1,220
bright676
B
R
Slc 500 eprom
What eprom will work on a 1747-L532 SER-D REV-4 OS302 SER-A FRN-9 I have tried a M11 & M13 and get error memory not large enough I forgot to...
Replies
3
Views
1,682
roxusa
R
D
Ab slc 5/04 eeprom
Can I take an EEPROM from one processor (locking up after a few hrs) and install in a replacement 5/04 processor and the program will auto load on...
Replies
2
Views
1,705
James Mcquade
J
Back
Top Bottom